Luna craft project
Use 20 lb. (regular typing paper weight) for printing. If you have a color paper, such as light green, light pink, or light blue, you may try that.
Because the pattern will only print on one side, you may choose to trace the pattern on the blank side. To do this place the printed wing up against a window (daytime), print side toward the window, and carefully trace the pattern on the back.
Color as you wish and cut out. You might want to cut out the fairy body and trace it on to a heavier paper. This is not necessary but it may give the whole structure more strength.
Assembling the Luna
Fold the top and bottom wings along the fold lines.
Put a thin line of glue along the fold line of the top wing and glue this to the bottom wing fold line. Make sure the wings meet at the top. You can place a book on top to hold it flat.
While this is drying , wrap the craft stick and glue the last bend to the fairy body.
When dry, glue the wings to the other side of the fairy body. You might have to hold this for awhile unless you have something to carefully clamp over the fairy.
Have patience, and do a good job. You will be very very surprised at how beautifully the Luna flies!