For this lesson, we will expand off the previous one. There are times when you need more oomph to your shield, when you need extra protection.

 

It was mentioned in the previous lesson that the outer shield is the tougher, thicker one and the inner is the thinner one, and in some cases this works perfect, but in othersnot so well. It is up to you to know when to boost the shield or what types you want to use.

 

For this shield, you can use a combination of any of the shields that has been discussed thus far, any colors, any shapes or any textures.

 

 In the previous lesson, you learned one way to develop the double layer shield, and while that technique can also be employed for the triple layer shield, another technique is this:

 

�?nbsp;Start with the innermost shield, see it there, feel it ex

panding around you and enclosing you in its protection.
�?nbsp;When that shield is complete, making sure it is an inch to two inches away from your body; you can create the next layer.
�?nbsp;Using your third eye and your senses, feel where the first shield ends and an inch or two away from that one,
�?nbsp;create your next shield in the same way. Feel it expand and enclose you.
�?nbsp;When you have the second layer complete, follow the same steps for the third layer.

 

One of my favorite shields I like to create employs this type of shield, using different styles. The innermost layer is a pure white light shield; the next layer is a shield that changes colors. Depending on what I need, it alternates between red, yellow, blue, and green, pink and purplesometimes it is a rainbow shield. For the outermost layer I employ the spider web shield. In between each layer, I have an energy vortex.

 

The purpose of each layer is this;

�?nbsp;The spider web catches all of the impurities, the bugs, the parasites and negativity that try to touch me. The web is sticky and so it catches everything, preventing it from entering.
�?nbsp;On the offshoot that something does make it through, it encounters the first energy vortex and it is swirled around, confusing it.
�?nbsp;If it makes it through that, it encounters the shield that changes colors. Depending on what color that shield is, depends on what it transforms the energy coming to me into.
�?nbsp;When it goes through that, it encounters the next energy vortex, but this vortex has a slightly different job. This vortex swirls the changed energy to where it is most beneficial.  
�?nbsp;This is where it goes through the final shield, the pure white shield. This shield purifies the energy, making sure there are no nasties left at all before it is allowed to come through.
�?nbsp;There is also protective programming on this shield, but we will not discuss that yet.

 

As you can see from the example above, you can use a variety of techniques to create the protection you want. You can make them as thick or thin as needed.

Shields do not have to be limited to triple layers. You can put as many layers as you need to achieve the effect that is perfect for you, but the more layers you use, the harder it is (initially) to maintain and create. It is not impossible, it just takes practice like anything else.

 

The most important thing, as with any shield, is your comfort, not what sounds good, but what feels good. If it does not feel comfortable, or blocks your abilities in any way, it is not the right shield for you.

 

Maintenance of this particular shield is trickier because it does entail more techniques for the shields themselves.
�?nbsp;For the quick clean, you can see pure white light coming from the universe and enveloping each shield in a white rain shower, washing away what does not belong there. You should actually do this several times a day to keep the shield fresh.
�?nbsp;Once a day you need to visualize each layer being cleaned. The outermost layer will need to have the parasites and fingerprints plucked off before it’s scrubbing. When the parasites are plucked off, just visualize a brush scrubbing each layer until it gleams. This can take minutes or seconds depending on how dirty they are. When they are scrubbed clean, have the white light come down and flood each layer, strengthening it and filling in any holes or tears.

 

Homework:

1) Figure out which combination of shields you want to use. Remember these can be a combination of light and energy shields, all energy or all lights.
2) Tell which combinations you used and why you chose them
3) Put the shield on, take it off a few times, and tell what experience that combination gave you. Did it block you too much? Was it too light?
4) Make any alterations to the shield that you feel comfortable with to fix the flaws from the previous attempt. Tell us what you changed from the original attempt to the new.
5) Put the shield on, take it off a few times, and again tell what experience that combination gave you.